Necta Rondo Programming Manual
  1. Manuals
  2. Brands
  3. Necta Manuals
  4. Vending machines
  5. Rondo
  6. Programming manual

Necta Rondo Programming Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Rondò
English
Code:
Date:
P2125EN00
01 - 2008

Advertisement

Table of Contents
loading

Related Manuals for Necta Rondo

Summary of Contents for Necta Rondo

  • Page 1 Rondò English Code: Date: P2125EN00 01 - 2008...
  • Page 3 ntroductIon This “Programming Manual” is a very useful tool for those operators who want to get the most out of the poten- tial of the installed software and know in detail all of the available software functions. This document is available in PDF format in the Reserved Area of our internet site www.nwglobalvending.com or, on request, through our after-sales service.
  • Page 4 essages for the user The following table indicates the most common strings that may be shown on the machine display in normal vending mode. String Description The machine waits for the user to make a product selection by SELECT THE PRODUCT pressing the relevant selection button.
  • Page 5 rogrammIng menu In order to access the programming menu rotate the key in the lock (1) to open the metal door, rotate the inter- nal handle clockwise to open the sliding compartment of the vending machine (2) pulling it outwards, switch on the machine by inserting the yellow key supplied in the relevant slot (3) shown in the figure.
  • Page 6 FILLER MEnu 1 - STATiSTiCS tatIstIcs 1.1 - STATiST.PRiNTiNG rIntIng the tatIstIcs 1.1.1 1.1.1 - PARTiAL PRiNTiNG artIal PrIntout 1.1.1.1 1.1.1.1 - SELECT. COUNT. rIntIng the selectIon counters When confirming this function, the counters regarding the different selections are printed. 1.1.1.2 1.1.1.2 - bAND COUNTER rIntIng the tIme band counters...
  • Page 7 FILLER MEnu 1.2 - PRiNT REL.STATS. rIntIng the relatIve statIstIcs 1.2.1 1.2.1 - PARTiAL PRiNTiNG artIal PrIntout 1.2.1.1 1.2.1.1 - SELECT. COUNT. rIntIng the selectIon counters When confirming this function, the relative counters regarding the different selections are printed. 1.2.1.2 1.2.1.2 - bAND COUNTER rIntIng the tIme band counters When confirming this function, the relative counters regarding the...
  • Page 8 FILLER MEnu 1.3 - STATiST. DiSPLAY IsPlayIng the statIstIcs 1.3.1 1.3.1 - SEL.COUNT.DiSPL. IsPlayIng the selectIon counters 1.3.1.1 1.3.1.1 - COUNT X S. SEL. IsPlayIng the sIngle counters This function is used for displaying the counters regarding each selection, divided by price band (0, 1, 2, 3, 4, Free, Test). 1.3.1.2 IsPlayIng the total counters 1.3.1.2 - TOT.COUNT DiSPL.
  • Page 9 FILLER MEnu 1.3.5 1.3.5 - PHOT.ERR.COUNTER IsPlayIng the Photocell error counters This function is used for displaying the value of the counter regard- ing the photocell errors. 1.3.6 1.3.6 - MOT.ERR.COUNTER IsPlayIng the motor error counters This function is used for displaying the value of the counter regard- ing the motor errors.
  • Page 10 FILLER MEnu 1.4.4 1.4.4 - COiN MECH.DiSPL. IsPlayIng the coIn mechanIsm data 1.4.4.1 1.4.4.1 - AUDiT DATA DiSP. IsPlayIng the audIt data This function is used for displaying the number of coins inserted in the vending machine, differentiated by the type of coin. 1.4.4.2 1.4.4.2 - CASH COUNT.DiSP.
  • Page 11 FILLER MEnu 1.5 - CANC.RELAT.STATS eletIng the relatIve statIstIcs 1.5.1 1.5.1 - PARTiAL RESET artIal delete 1.5.1.1 1.5.1.1 - SELE. COUNT RESET eletIng the selectIon counters When confirming this function, the counters regarding the different selections are deleted. 1.5.1.2 1.5.1.2 - fAiLURE COUNT. eletIng the faIlure counters When confirming this function, the counters regarding the different failure are deleted.
  • Page 12 FILLER MEnu 2 - iNDiViDUAL PRiCE Ingle PrIces 2.1 - PRiCE bAND 0 rIce band This function is used for setting a different price for each selection in time band 0. 2.2 - PRiCE bAND 1 rIce band This function is used for setting a different price for each selection in time band 1.
  • Page 13 FILLER MEnu 4 - SPECiAL SELECT. PecIal selectIons 4.1 - ViRTUAL SELECT. Irtual selectIons This function is used to define a pair of selections that can be sold at a price different from the sum of the two selections, using a single selection number.
  • Page 14 FILLER MEnu 5 - TEST 5.1 - TEST SELECTiON est selectIon This function is used to simulate the normal dispensing of products without inserting any money to check the functioning of the spiral rotation by pressing the selection buttons. 5.2 - MOTOR TEST otor test This function is used for actuating all motors in a sequence, indicat- ing on the display the number of the involved selection.
  • Page 15 FILLER MEnu 6 - GSM 6.1 - RESET PRE-AL.CNT esettIng the Pre alarm counters With this function the counters that control the pre-alarms are reset. evadts 7 - EVADTS 7.1 - CONNECTiON onnectIon This function places the machine in wait mode for connection to retrieve data.
  • Page 16 TECHnICIAn MEnu 1 - fAiLURES aIlures 1.1 - fAiLURE READiNG eadIng the faIlures When the “Failure” function is displayed, press the confirm button “ � ” to display the present failures. If no failures are currently present, after pressing the confirm button “...
  • Page 17 TECHnICIAn MEnu 2 - PROGR.PARAMETERS rogrammIng Parameters 2.1 - CASH This set of functions controls all parameters regarding the payment systems and the sales prices. 2.1.1 2.1.1 - PRiCES rIces Four different prices can be set for each selection according to the programmed time bands for when the time table option is enabled.
  • Page 18 TECHnICIAn MEnu 2.1.1.2 2.1.1.2 - GLObAL PRiCES ettIng global PrIces 2.1.1.2.1 2.1.1.2.1 - PRiCE bAND 0 rIce band This function is used for setting a single price for all selections avail- able in time band 0. 2.1.1.2.2 2.1.1.2.2 - PRiCE bAND 1 rIce band This function is used for setting a single price for all selections avail- able in time band 1.
  • Page 19 TECHnICIAn MEnu 2.1.1.3 2.1.1.3 - TiME bANDS Ime bands Four programmable time bands are provided for selling products at different prices. Time band 0 is not programmable and covers the 24 hours. 2.1.1.3.1 2.1.1.3.1 - SET DATE & TiME ate and This function is used for setting the reference time given by an inter- nal clock programmable for: day/month/year/week-day 1-7 (1=Monday, 2=Tuesday, etc…) and...
  • Page 20 TECHnICIAn MEnu 2.1.2 2.1.2 - COiN MECHANiSMS oIn mechanIsms 2.1.2.1 2.1.2.1 - COiN MECHAN.SET. ettIng the coIn mechanIsms It is possible to decide which of the payment system protocols avail- able are to be enabled for the functions. The available payment systems are: - Executive - Validators - BDV...
  • Page 21 TECHnICIAn MEnu 2.1.4 2.1.4 - MASTER SLAVE aster lave The machine control system is pre-arranged for the connection in a bank of vending machines (Astro, Oblò, Sfera and Rondò). 2.1.4.1 2.1.4.1 - SET UP ettIngs This function is used for setting the hierarchies of master/slave rela- tionships between connected vending machines.
  • Page 22 TECHnICIAn MEnu 2.2 - SPiRAL/SELECT. PIrals selectIons 2.2.1 2.2.1 - SPiR. PARAMETERS PIral Parameters 2.2.1.1 2.2.1.1 - MACHiNE CONfiG. achIne confIguratIon This function is used to detect and store the number and position of the trays and of the selection motors. 2.2.1.2 2.2.1.2 - ViRTUAL SELECT.
  • Page 23 TECHnICIAn MEnu 2.2.1.6 2.2.1.6 - PRODUCT CODE roduct code This function is used to assign a 4-digit identification code to each spiral for processing the statistics. 2.2.1.7 2.2.1.7 - DiRECT SELECT. Irect selectIons 2.2.1.7.1 2.2.1.7.1 - EN. DiR. SELECT. nablIng dIrect selectIons The vending machine can be fitted (as standard feature or as optional according to the model) with a 5-button keypad to which allocate a group of selection.
  • Page 24 TECHnICIAn MEnu 2.2.2 2.2.2 - PHOTOCELL PARAM. hotocell Parameters 2.2.2.1 2.2.2.1 - SETTLiNG TiME ettlIng tIme The vending machine can be fitted (as standard feature or as optional according to the model) with a device that, by means of photocells, detects the passage of dispensed products. With this function it is possible to set for each spiral/selection a rota- tion time further to the normal rotation to allow correct dispensing of the product.
  • Page 25 TECHnICIAn MEnu 2.3 - COLD PARAMETERS old Parameters 2.3.1 2.3.1 - TEMPERATURE emPerature With this function the machine internal temperature during normal operation can be set directly in °C (3.5°C to 20°C, 8°C by default). The cooling unit starts/stops when the differential deviation of the set temperature is 2°C.
  • Page 26 TECHnICIAn MEnu 2.4 - DiSPLAY IsPlay 2.4.1 2.4.1 - LANGUAGE anguage With this function it is possible to select the language used for surf- ing within the programming menus and while in normal vending mode. The list of available languages is indicated in the dose table. 2.4.2 2.4.2 - USER DiSPLAY IsPlayIng messages for the user...
  • Page 27 TECHnICIAn MEnu 2.4.4 2.4.4 - CUSTOMiZ.STRiNGS ustomIzed strIngs 2.4.4.1 2.4.4.1 - ENAb. CUSTOM.STR nablIng the customIzed strIngs The machine uses standard messages to give information to the user during normal operation (e.g. “Ready”, “Take” etc.). By enabling this function it is possible to change these messages as necessary.
  • Page 28 TECHnICIAn MEnu 2.5 - MiSCELLANEOUS Iscellaneous 2.5.1 2.5.1 - SET PASSWORD ettIng the Password With this function it is possible to enable the option of requesting the password to access the programming “Technician menu”; the password request is disabled by default. The password is a 5-digit alphanumeric code that can be changed.
  • Page 29 TECHnICIAn MEnu 3 - STATiSTiCS tatIstIcs 3.1 - STATiST. DiSPLAY IsPlayIng the statIstIcs 3.1.1 3.1.1 - SEL.COUNT.DiSPL. IsPlayIng the selectIon counters 3.1.1.1 3.1.1.1 - COUNT X S. SEL. IsPlayIng the sIngle counters This function is used for displaying the counters regarding each selection, divided by price band (0, 1, 2, 3, 4, Free, Test).
  • Page 30 TECHnICIAn MEnu 3.1.5 3.1.5 - PHOT.ERR.COUNTER IsPlayIng the Photocell error counters This function is used for displaying the value of the counter regard- ing the photocell errors. 3.1.6 3.1.6 - MOT.ERR.COUNTER IsPlayIng the motor error counters This function is used for displaying the value of the counter regard- ing the motor errors.
  • Page 31 TECHnICIAn MEnu 3.3 - DiSP.REL.STATS. IsPlayIng the relatIve statIstIcs 3.3.1 3.3.1 - SEL.COUNT.DiSPL. IsPlayIng the selectIon counters 3.3.1.1 3.3.1.1 - COUNT X S. SEL. IsPlayIng the sIngle counters This function is used for displaying the counters regarding each selection, divided by price band (0, 1, 2, 3, 4, Free, Test). 3.3.1.2 3.3.1.2 - TOT.COUNT DiSPL.
  • Page 32 TECHnICIAn MEnu 3.3.5 3.3.5 - PHOT.ERR.COUNTER IsPlayIng the Photocell error counters This function is used for displaying the value of the counter regard- ing the photocell errors. 3.3.6 3.3.6 - MOT.ERR.COUNTER IsPlayIng the motor error counters This function is used for displaying the value of the counter regard- ing the motor errors.
  • Page 33 TECHnICIAn MEnu 3.5 - DiSPL.DiSP.START IsPlayIng the counters at Power By enabling this function, it is possible to display the total counters when the machine is switched on. 3.6 - STATiST.PRiNTiNG rIntIng the tatIstIcs 3.6.1 3.6.1 - PARTiAL PRiNTiNG artIal PrIntout 3.6.1.1 3.6.1.1 - SELECT.
  • Page 34 TECHnICIAn MEnu 3.7 - PRiNT REL.STATS. rIntIng the relatIve statIstIcs 3.7.1 3.7.1 - PARTiAL PRiNTiNG artIal PrIntout 3.7.1.1 3.7.1.1 - SELECT. COUNT. rIntIng the selectIon counters When confirming this function, the relative counters regarding the different selections are printed. 3.7.1.2 3.7.1.2 - bAND COUNTER rIntIng the tIme band counters When confirming this function, the relative counters regarding the...
  • Page 35 TECHnICIAn MEnu 4 - TEST 4.1 - TEST SELECTiON est selectIon With this function it is possible to simulate the normal dispensing of products without inserting any money. It is therefore possible to check the functioning of the motor rotation by pressing the selection buttons.
  • Page 36 TECHnICIAn MEnu 5 - MiSCELLANEOUS Iscellaneous 5.1 - VEND.MACH. DATA endIng machIne InformatIon 5.1.1 5.1.1 - iNSTALLAT. DATE nstallatIon date This function is used for storing the current date of system as instal- lation date of the vending machine. This date will be indicated on the statistics printout.
  • Page 37 TECHnICIAn MEnu evadts 5.3 - EVADTS The EVADTS (European Vending Association Data Transfer System) communication protocol has 2 codes for identifying the machine and for recognising the data transfer terminal. 5.3.1 5.3.1 - PASS.CODE ass code It is a four-digit alphanumeric code (0-9; A-F) that must be the same as the one in the data transfer terminal to allow its identification.
  • Page 38 TECHnICIAn MEnu 5.4 - UPKEY 5.4.1 5.4.1 - SETUP MANAGEMENT etuP control 5.4.1.1 -> 5.4.1.1 - UPKEY->MACHiNE vendIng machIne When confirming this function after inserting the Up-Key in the special port located on the C.P.U. board, it will be possible to select the setup file from the list shown on the display using the scrolling buttons, then when confirming with the confirm button the selected setup will be loaded in the vending machine.
  • Page 39 TECHnICIAn MEnu 6 - GSM The control software can send, via GSM modem, a signal indicating a machine failure or an “ending product” “pre-alarm”, after dis- pensing a certain (programmable) number of selections of a given product. gsm P 6.1 - GSM PiN CODE In code This function is used for programming the identification code that will be sent to the GSM modem (optional) when switching the ma-...
  • Page 40 Ist of aIlures omPressor The machine is locked if the compressor runs non-stop for more than 24 hours. oIn mechanIsm The machine is locked if it receives a pulse longer than 2 seconds on a validator line or the communication with the serial coin mechanism does not take place for more than 30 seconds (Executive protocol) or 75 sec- onds (BDV protocol).
  • Page 41 echanIsm ettIngs In the event of configuring the machine in a bank, this setting permits the control of 2 payment systems in- stalled in 2 vending machines, so that when one payment system fails or no longer works, automatically the other payment system becomes functional for the bank of machines.
  • Page 42 echanIsm ettIngs Value of “exact amount” This value defines the combination of empty coin tubes, setting the coin mechanism in “exact amount” mode. The possible combinations of empty coin tubes are indicated below. For greater simplicity, the combination is described with reference to tubes A, B and C, where tube A receives the lower value coins and tube C the greater value coins.
  • Page 43 echanIsm ettIngs Minimum level of tubes This function is used for setting the number of coins (0 to 15) to determine the status of full change tubes and the “Insert exact amount” message for the user. Accepted bills It is possible to define which, among the bills recognised by the reader, are to be accepted. Check the reader configuration for the correct bill to value matching.
  • Page 44 echanIsm ettIngs Maximum cash credit This function is used for setting the maximum credit that can have a key / cashless card to be acceted by the system. If the key has a higher value, it will be rejected. The value setting must be always greater or equal to the value set with the function “Maximum cash revalue”; in the event it were changed and become lower than such value, it will be set automatically to the same value of the “Maximum cash revalue”.
  • Page 45 The manufacturer reserves the right to modify, without prior notice, the characteristics of the equipment de- scribed in this publication; he declines all responsibility for any inaccuracies due to printing and/or typing errors herein contained. The instructions, drawings and information in general contained in this booklet are of a confidential nature and may not be reproduced entirely or in part or be passed on to a third party without the prior written authorisation of the manufacturer who retains its exclusive ownership.

Table of Contents