Programming; Maintenance And Cleaning; Safety Precautions; Dpi Characteristics - Wega ALE Series Use And Maintenance Manual

7.

PROGRAMMING

For programming the machine, follow the provisions
in the user's manual.
8.

MAINTENANCE AND CLEANING

Safety precautions

8.1
Perform only the maintenance and cleaning operations described
in this manual.
If the problem cannot be solved, turn the machine off and contact
the Manufacturer.
All maintenance operations must be carried out after disconnecting
the power, water, and gas supply (if included) after the complete
cooling of the machine.
After maintenance and/or repair intervention, the components
used must ensure that the hygiene and safety requirements
initially provided for the appliance are still met. These are met
by using original spare parts only. After repair or replacement
of components related to parts in direct contact with water and
food, a washing procedure has to be carried out, as in the case of
first installation.
TECHNICIANS manual
The following residual risks are present during the
maintenance and cleaning of the machine and cannot
be eliminated:
Electrical hazard:
The maintenance and cleaning operations are subject
to the behavioral safety rules:
do not carry out the maintenance with the machine
in operation;
do not soak the machine in water;
do not spill liquids on the machine or use water jets
for cleaning;
do not to allow the maintenance and cleaning
operations to be carried out by children or incapaci-
tated people;
do not perform maintenance and cleaning opera-
tions other than those described in this manual.
Danger of high temperature:
During the cleaning operations, pay attention to the
parts of the machine that can become overheated:
avoid contact with the dispensing group and water
spouts;
do not expose your hands or other body parts to the
coffee, steam, or hot water spouts.
Explosion hazard:
If provided with gas system, pay special attention to:
When indoors, always provide vents.
Check for gas leaks.
Do not under any circumstances attempt to light the
gas without first installing the proper injector.
Do not operate the gas burners when the boiler is
empty.

DPI characteristics

8.2
During maintenance and cleaning of the machine,
the following PPE are required:
Mandatory use of protective gloves
33 68
of