Periphery Update; Site - Siemens FS720 Configuration

Software administration
4
Pre-settings

4.5.8 Periphery update

4.5.9 Site

4.5.9.1 Country Data Variant
42 | 412
Building Technologies
Fire Safety
In the 'Periphery update' view, the ports for updating the peripheral devices can be
defined:
● For devices that are connected directly to the COM port.
● For devices that are connected via USB or FDUZ22x.
The settings are automatically set as standard when a device is updated.
The following can be set in the ↑ 'Site' view:
● Path to the folder where the 'Sites' are stored.
● Path to the ↑ 'BDV' folder: This folder contains the BDV that was included
when the software was installed or that has been imported using the 'Import
new BDV' function. This folder may contain more than one BDV.
● Preferred BDV language: This selection determines which BDV language is
displayed if the BDV contains several languages. If the preferred language is
not included in the current BDV, English is used as standard.
Figure 2: CDV presettings
The view 'Country data variant' in the 'Preferences' window is only visible in
certain country-specific tool installations, for which use of a CDV is intended.
The following can be set in the 'Country data variant' view:
● Path to the folder where the 'Country data variant' is stored.
A6V10210424_j_en_--
2018-08-29