Table of Contents
Advertisement
The unit is equipped with an output circuit that can supply
power to the connected devices even if the unit stops due
to a failure or mis-operation of the internal circuit function.
If you want to stop the output, stop the source of the "input
power supply".
• Output is continuing even when all indicators of the
front panel are off.
When charging the battery, if the battery cannot be
charged completely even after the predetermined
charging time, turn OFF the "Power" switch of the unit to
stop charging the battery.
The unit will stop after 30 seconds of setting the mode
selection/backup operation time selection switch to "0.5".
• Otherwise, it may cause an abnormal heating, smoke, rupture or
fire on the battery.
(for maintenance)
When performing maintenance of the connected
equipment, turn OFF the unit's power and stop the supply
from the input power supply.
The unit will stop after 30 seconds of setting the mode
selection/backup operation time selection switch to "0.5".
• Even if the input power supply is stopped in the
operating state, the power supply output of the unit will not stop,
and power will be supplied from the battery.
Do not disassemble, repair, or modify the unit.
• Doing so may cause an electric shock or a fire.
If fluid leaks from the interior, do not touch the fluid.
• Doing so may cause blindness or burns.
• If the fluid contacts your eyes or skin, wash it out with
lots of clean water and consult your doctor.
Do not throw the unit into fire.
• Since the battery is incorporated in the unit, the
insulator may melt, the gas exhaust valve or protection
mechanism may be damaged, or the electrolyte may
catch fire, and it may result eventually in an abnormal
heating, smoke, rupture or fire.
Do not insert metal objects into the input terminal block
and the output terminal block of the UPS.
• Doing so may result in electric shock.
Do not insert metal objects into the battery connectors.
Do not short between the connector terminals.
• Doing so may result in electric shock.
• The battery unit's protection board may be damaged
due to a short-circuit.
(for battery replacement)
Do not use other than the designated battery unit.
• Not doing so may cause a fire.
• Product model: S8BA-S480L, S8BA-S960L
Do not replace the battery unit in a place where there is
flammable gas.
• Spark may occur when connecting the battery unit,
which may cause an explosion or fire.
If fluid leaks from the battery unit, do not touch the fluid.
• Doing so may cause blindness or burns.
• If the fluid contacts your eyes or skin, wash it out with
lots of clean water and consult your doctor.
Do not disassemble or modify the battery unit.
• A safety mechanism and protection mechanism to
prevent danger are embedded into the battery unit. If
these are damaged, it may cause the battery to emit
heat, smoke, explode, or catch fire.
Do not drop the battery unit and do not expose it to strong
impact.
Dropping the unit may result in injury or fire.
• Doing so may cause a leakage, abnormal heating,
smoke, rupture or fire on the battery unit. And, if the
battery unit's protection mechanism is broken, the
battery may be charged at an abnormal current or
voltage, an abnormal chemical reaction may occur
inside the battery, and it may result eventually in an
abnormal heating, smoke, rupture or fire.
Do not short the battery unit with metal objects.
• Doing so could cause an electric shock, fire or burn.
• Some electrical energy still remains inside the spent
battery unit.
Do not dispose of battery units in a fire.
• The insulator inside the battery unit may melt, the gas
exhaust valve or protection mechanism may be
damaged, or the electrolyte may catch fire, and it may
result eventually in abnormal heating, smoke, rupture
or fire.
S8BA-SBF
35
Advertisement
Table of Contents
