Table of Contents
Advertisement
3. Press the PAIRING key of the Host for five seconds, the LED indicator of the Host will blink
blue for two minutes, waiting to pair with a Button.
If the Host is attached to the ceiling so that it is not easy to press the PAIRING key, please use the pairing
process in the web management interface. Refer to
4. Press the split screen key on the side of the Button for five seconds. The LED indicator of the
Button will blink blue for about 10 seconds. The pairing process is ongoing. The "Pairing in
progress" message will be shown on the screen.
The images are for reference only. Each product has different serial number.
00:00:00
00:00:05
Pairing on page 49
Pairing in progress
for information.
00:00:00
00:00:05
Installation
25
Advertisement
Table of Contents
