Table of Contents
Advertisement
2. The LED indicator of the Button will flash green while the Button is starting up.
3. When the Button is ready to present, the LED indicator will turn solid green. Press the Present
key when the LED indicator turns green.
• If the Button encounters problems while pairing with the Host during startup the LED indicator will flash red.
Repeat the previous the process again until the LED turns solid green. See
the Host on page 10
• Handle the Button cable with care. Rough handling might cause defects.
• Pull/Push the plug instead of the cable when inserting or removing Buttons.
If you purchase an additional Button (via a Button Kit), please follow the process described below:
1. Follow the pairing instructions described in
2. Connect the Button's HDMI and USB jacks to the corresponding inputs of a laptop. See the
illustration.
for more information on LED behavior.
USB
3.0
Pairing a Button and Host on page
HDMI
1.4
LED indicators of the Button and
24.
Installation
21
Advertisement
Table of Contents
