Beeper And Led Definitions - Symbol MiniScan MS-804FZY Integration Manual

MS-804FZY and MS-904HS Integration Guide

Beeper and LED Definitions

Table 1-1 provides standard beeper definitions, and
Table 1-1. Standard Beeper Definitions (External Beeper Required)
Beeper Sequence
Standard Use
1 Beep - short high tone
1 Beep - long high tone
Parameter Menu Scanning
2 Beeps- short high tone
1 Beep- hi/lo/hi/lo tone
2 Beeps - lo/hi tone
Communication
4 Beeps - short high tone
4 Beeps - hi/hi/hi/lo
3 Beeps - lo/hi/lo
LED
Red
Green
1-6
A bar code symbol was decoded (if decode beeper is enabled).
Thermal shutdown.
Correct entry scanned or correct menu sequence performed.
Successful program exit with change in the parameter setting.
Input error, incorrect bar code, or Cancel scanned, wrong entry,
incorrect bar code programming sequence; remain in program
mode.
Communication error.
Receive error.
ADF transmit error.
Table 1-2. LED Definitions
Scanner is on.
A bar code is successfully decoded.
Table 1-2 provides LED definitions.
Indication
Indication