Copying Onto Envelopes From The Bypass Tray - Ricoh Aficio MP C4501 Manual

2. Basic Copying
5. Select a paper weight from 1 to 4, and then press [OK].
2
Select [Thick Paper 1] when paper weight is between 106 g/m
lb. Index).
Select [Thick Paper 2] when paper weight is between 170 g/m
lb. Cover).
Select [Thick Paper 3] when paper weight is between 221 g/m
lb. Index).
Select [Thick Paper 4] when paper weight is between 257 g/m
(110 lb. Cover).
6. Specify the paper size, and then press [OK] twice.
7. Place the originals, and then press the [Start] key.
• When copying onto Thick Paper 4, copy paper is output in the internal tray even if you specified a
different tray.
• Printing on thick paper may be slower than printing on plain paper.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.

Copying onto Envelopes from the Bypass Tray

When copying onto envelopes, specify the paper type and paper size.
• Before using this function, select [Envelope] under Paper Type: Bypass Tray in User Tools. For details,
see "System Settings", Network and System Settings Reference.
• Before loading self-adhesive envelopes, be sure to fan them thoroughly. This will prevent them sticking
together. If fanning does not prevent them sticking together, load them one by one. Note that some
types of envelope cannot be used with this machine.
• The Duplex function cannot be used with envelopes. If [1 Sided
setting.
50
2
(28 lb. Bond) and 169 g/m
2
(65 lb. Cover) and 220 g/m
2
(80 lb. Cover) and 256 g/m
2
(140 lb. Index) and 300 g/m
2 Sided] is selected, cancel the
2
(90
2
(80
2
(140
2