Stack - Ricoh Aficio MP C4501 Manual

2. Basic Copying
Changing the number of sets
You can change the number of copy sets during copying.
• This function can be used only when the Sort function is selected.
1. While "Copying..." is displayed, press the [Clear/Stop] key.
2
2. Press [Change Quantity].
3. Enter the number of copy sets with the number keys, and then press the [ ] key.
4. Press [Continue].
Copying starts again.
• The number of sets you can enter in step 3 differs depending on when the [Clear/Stop] key is pressed.

Stack

Groups together copies of each page in a multi-page original.
If the internal shift tray or a finisher is attached, each time the copies of one page are delivered, the next
copy is shifted when delivered so you can separate each job by page.
80
BZH083