Ricoh Aficio MP C4501 Manual page 93

The relationship between the orientation in which you place the original and the punch hole positions
is as follows:
*1 The above table shows punch hole positioning. Punched sheets might not be delivered in the orientation
shown in this table.
*2 If you want to punch at this position, select unreadable orientation in Original Orientation and then select
2 Holes Top/3 Holes Top.
*3 You cannot punch at this position when copying onto the following paper sizes: A3, B4 JIS, 11 × 17,
1 1
8 / × 14, 8 /
2 2
1. Press [Finishing].
2. Select one of the punch hole positions.
When Booklet Finisher SR3000 is attached (Type 1 and 2):
*1
*3
*2
*2 *3
*3
*2
*2 *3
BZK073
1
× 13, 8 / × 13, 8 × 13
4
Finishing
2
91