E5@C-T Controller Setup; Checking Operation - Omron E5C-T Series Communications Manual

Click the Yes Button to restart the Unit. Select All ports and then click the OK Button.
A dialog box will be displayed when the Unit has been restarted. Click the OK Button. This
completes the PLC setup procedure. You will use the CX-Programmer to check operation,
so leave it online.
6-5-4

E5@C-T Controller Setup

Set up programless communications. Perform the procedure that is given in 6-4-4 E5
Setup.
6-5-5

Checking Operation

Perform the procedure that is given in 6-4-5 Checking Operation.
E5C-T Digital Temperature Controllers Programmable Type Communications Manual (H186)
6 Programless Communications
@
C-T Controller
6
6 - 39