6-2-11 Communications Monitor Parameter - Omron E5C-T Series Communications Manual

6-2-11 Communications Monitor Parameter

This parameter displays the communications cycle time of the E5@C-T. If communications with the PLC
are not possible, c.err is displayed and then the cycle time is displayed again when communications
are restored.
E5CC-T
No.0
C
25
0
Adjustment Level
Display condition: The Protocol Setting parameter must be set to fins or mcp4.
Parameter name
Communications
Monitor
Note: If this parameter is monitored in PLC memory, the cycle time is given as 0 to FFFF hex (0 to 65,535 decimal).
An error is indicated by FFFF hex.
E5C-T Digital Temperature Controllers Programmable Type Communications Manual (H186)
PLC
E5CC-T E5CC-T
No.1 No.2
C C C
25
0
Cycle time of E5CC-T with communications unit number 0
Displayed
characters
plcm
Normal operation: 0 to 9999 ms. If 9,999 ms is exceeded,
]]]] is displayed.
Error: c.err
6 Programless Communications
E5CC-T
No.0
C C
25 25 25 25
0 0 0 0
Monitor range*
Order of
communications
Default
---
6
6 - 19