Fixation Of Cable Duct Mounting Bracket; Temporarily Securing The Rear Bracket - Fujitsu PRIMERGY 19 User Manual

19-inch rack

Table of Contents

4.5.2 Fixation of cable duct mounting bracket

1 From the inside, fixation the cable duct mounting bracket with M5 self-tapping screws in the screw

hole of a set of two screw holes in the rear rack post.

（Rear view）

1 To the second the threaded hole from the lower side from the rear, fit an M5 self-tapping screw in the

second the threaded hole from the lower side in the cable duct mounting bracket. Then, temporarily

tighten it, leaving a clearance of about 5 mm between the screw and the cable duct mounting bracket.

2 Fit the lower securing hole of the rear bracket to the M5 self-tapping screw installed in step 1, and

secure the upper part with an M5 self-tapping screw.

mounting bracket

Table of Contents

Table of Contents