Controls Options - Lennox T-CLASS TS Series Engineering Data

FEATURES AND BENEFITS
Cabinet
I
Heavy−gauge, pre−painted steel cabinet provides superior
rust and corrosion protection.
Removeable panels allow access for unit servicing.
J
Heavy duty steel base channels raise the unit off of
mounting surface away from damaging moisture.
Unit lifting holes and forklift slots furnished in base rails.
See dimension drawings.
K
Control Box
Control box located in separate compartment in unit
cabinet .
All controls are pre-wired at the factory.
Control box is large enough for field installed DDC or other
field supplied control modules.
OPTIONS
Factory Installed
Corrosion Protection
Polymeric epoxy coating that is deposited by electrical
transport (electrophoresis), using a process known as
electrocoat (e−coat). Available for enhanced coil corrosion
protection. Factory installed on the condenser coil.
Painted base pan is provided with this option.
Field Installed
Coil Guards
Heavy duty sheet metal and metal mesh enclosures
protect coils from damage. Field installed.
Hail Guards
Heavy duty sheet metal and metal mesh enclosures
protect coils from damage. Field installed.
TS 6 to 20 Ton R−410A Air Conditioners / Page 4
CONTROLS
OPTIONS
Field Installed
®
L Connection Network
Complete building automation control system for single or
multi−zone applications. Options include local interface,
software for local or remote communication, and
hardware for networking other control functions. See L
Connection Network Engineering Handbook Bulletin for
details.
Network Thermostat Controller
Required for use with the L Connection Network. Monitors
and controls system operation.
Low Ambient Control
Air conditioning units operate satisfactorily down to 30ºF
outdoor air temperature without any additional controls.
Low Ambient Control Kit can be field installed, allowing
unit operation down to 0ºF.
Thermostat
Thermostat is not furnished with unit and must be ordered
extra.
See Page 5, individual Thermostat bulletins and Lennox
Price Book.