NOTES − Net capacity includes indoor blower motor heat deduction. Gross capacity does not include indoor blower motor heat deduction.
Units with capacity of 65,000 Btuh or greater are certified in accordance with the ULE certification program which is based on ARI Standard 340/360: 95_F outdoor air
temperature, 80_F db/67_F wb entering evaporator air (minimum external duct static pressure) with 25 ft. of connecting refrigerant lines.
1
Factory installed RFC or expansion valve on indoor unit MUST be replaced with expansion valve kit (ordered separately).
2
Blower must be capable of time−off blower delay. Indoor Blower Off Delay Relay (58M81) is recommended for field installation.
3
Blower control must be set for a time−off blower delay.