Call Pickup - Polycom VVX Series Manual

Hv.select cloud hosted telephone system
Hide thumbs Also See for VVX Series:
Table of Contents

Advertisement

Dialling
It's best to dial like you do on a mobile phone – i.e key in the number
first (NB no '9' is needed for an outside line), and only then pick up the
handset or press the Send Softkey.
If you key in the number after getting dialtone it will still work, but you
may notice a delay after you finish keying in the number unless you
press Send to confirm you have finished dialling.
For on-hook dialling press the speakerphone key instead of picking up
the handset. Similarly if using a heaset press the the headset key.
Hold
Press the Hold button or Hold softkey, and press the same button or
the Resume softkey to get the call back.
Transfer
Whilst on a call press the Transfer softkey; enter the number you wish to
transfer to (caller gets music on hold, if active) then press Send. After
speaking to the other party (or before if you wish) press Transfer again
to complete the transfer.

Call Pickup

To pick up a call ringing on another phone in your group, press the
Pickup softkey or dial *98.
Call Park
To park a call press "transfer" and dial *68 then enter the extension
number you wish to park the call at then press #
To park at own extension dial *68 the #

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vvx400Vvx 300

Table of Contents