Parameter Assignment - Siemens SITRANS L Series Operating Instructions Manual

Parameter assignment

Note
• Keep infrared devices such as laptops and cell phones away from SITRANS Probe LR to
prevent inadvertent operation.
• Do not use the Handheld Programmer at the same time as SIMATIC PDM, or erratic
operation may result.
SITRANS Probe LR is configured through its parameters, and the application determines the
parameter values which are entered into the instrument. Check your value entries carefully
before operating SITRANS Probe LR, to ensure optimum performance.
Helpful hints
● Default values are indicated with an asterisk (*) in the parameter tables, unless explicitly
described
● Primary index is an address: for example, P054
● Secondary index is a sub-address that allows for multiple values on an indexed point, and
allows indexed values from more than one parameter to be linked, for example, the
breakpoints in P054 and P055.
To access a parameter and change a value (primary index):
Note
Initial zeros in a parameter number do not have to be entered: for example, for P001, key in
1.
1. Press PROGRAM
2. Either use the ARROW
DISPLAY
number followed by ENTER
3. Key in the new value.
4. Press ENTER
40
then DISPLAY
keys to scroll to each parameter number, or press
again to access the parameter number field and key in the parameter
.
.
to activate PROGRAM Mode.
SITRANS Probe LR with mA/HART
Operating Instructions, 05/2019, A5E32337711-AC
7