Table of Contents
Advertisement
Figure 23. Display preferences screen
Date Format
Touch the Date Format button to open the associated
screen. Three options are available to display the current
date: MMDDYYYY, DDMMYYYY, and YYYYMMDD.
Date Separator
Touch the Date Separator button to open the associated
screen. Three options are available to display separators
in the date format: None, Hyphen (-), or Slash (/).
Time Format
Touch the Time Format button to open the associated
screen. Two options are available: 12-Hour format and 24-
Hour format (also referred to as "military time").
Unit System
Touch the Unit System button to open the associated
screen. Two options are available: SI (system
international) or IP (Inch-Pound).
Brightness
Touch the Brightness button, or the brightness icon
(
)located at the bottom left of each screen, to open the
associated screen. Screen brightness is measured in
percentage. Use the keypad to enter a new brightness
number.
Backlight Time-out
Touch the Backlight Time-out button to open the
associated screen. This value is measured in minutes, with
30 being the maximum limit. Use the keypad to enter a
backlight time-out value. This value is the amount of time
that the display will remain lit without activity. When the
RT-SVX49C-EN
backlight times out, users will be automatically logged off
due to inactivity.
Header Data Point
Use the arrow button on the Display Preferences screen to
advance to page 2. Touch the Header Data Point button to
open the associated screen. The Header Data Point
appears in the top right display area on all screens. Use the
arrow buttons to scroll through the points. Click Add to
move the highlighted point to the right side of the
screen(Figure 24, p.
34). Click Save.
Settings
33
Hide quick links:
Advertisement
Table of Contents
