CITROEN BERLINGO MULTISPACE Handbook page 45

Returning the seat to the sitting position
F Tilt the assembly backwards until it locks.
F Straighten the backrest.
The seat is locked correctly when the control
(at the top of the backrest) is no longer visible.
Check that the seat has correctly engaged
in its anchorages on the floor when
returned to the seating position.
Removing the bench seat
F If necessary, move the front seats forward.
F Place the bench seat (1/3 and/or 2/3
section) in the fully folded position.
Refer to the "Fully folded position",
described previously.
F Tilt the entire seat approximately 45°
backwards.
F Raise the bench seat vertically to the limit
of the fixings.
F Straighten the bench seat by tipping it
forwards, then raise it up.
https://www.automotive-manuals.net/
Ease of use and comfort
Refitting the bench seat
F Offer up the bench seat (1/3 section and/or
2/3 section) vertically.
F Place the hooks between the two bars.
F Fold the bench seat backwards.
To return the bench seat (1/3 section and/
or 2/3 section) to "passenger transport"
position, refer to the "Fully folded
position", described above.
Rear seats (5 seats)
The three independent rear seats are fitted with
rounded head restraints.
The backrest of the central seat, folded on to
the seat, has a shell which acts as a tray with a
cup holder.
3
43