CITROEN BERLINGO MULTISPACE Handbook page 144

Practical information
Procedure
Before topping up, ensure that the vehicle is
parked on a flat and level surface.
In wintry conditions, ensure that the
temperature of the vehicle is above -11°C.
Otherwise the AdBlue ® may be frozen and
so cannot be poured into its tank. Park your
vehicle in a warmer area for a few hours to
allow the top up to be carried out.
F With the vehicle unlocked, open the fuel
filler flap; the blue filler cap for the AdBlue
tank is located to the left of the black fuel
filler cap.
F Turn the blue cap 1/6
th
clockwise.
F Remove the blue cap.
142
F Obtain an AdBlue
first checking the use-by date, read the
instructions on the label carefully before
pouring the contents of the container or
bottle into your vehicle's AdBlue tank.
Or
F Insert the AdBlue
the tank until the nozzle stops automatically.
Important:
- To avoid overflowing the AdBlue
it is recommended:
• To do a top up of between 10 and
Or
• That you stop after the nozzle's first
- If your vehicle's AdBlue
completely empty – which is confirmed
by the alert messages and the
®
impossibility of starting the engine –
you must add at least 5 litres.
of a turn anti-
https://www.automotive-manuals.net/
® container or bottle. After
®
pump nozzle and refill
®
tank,
13 litres using the AdBlue ® bottle.
automatic stop if you are refilling at a
service station.
®
tank is
Once the AdBlue tank has been filled
after a breakdown due to running out
of AdBlue, you must wait for at least
5 minutes before switching on the
ignition, opening the driver's door,
unlocking the vehicle or inserting the
key in the switch.
Switch on the ignition, then after a
minimum of 10 seconds, start the engine.