CITROEN BERLINGO MULTISPACE Handbook page 191

Procedure from the system
Activate the Bluetooth ® function on the
telephone and ensure that it is "visible to all"
(telephone configuration).
Press Telephone to display the
primary page.
Press the secondary page.
Select "Bluetooth ® connection".
Select "Search for devices".
The list of telephones detected is displayed.
If the pairing procedure fails, it is
recommended that you deactivate and
then reactivate the Bluetooth ®
your telephone.
Select the name of the chosen telephone in the
list and "Confirm".
Enter a code of at least 4 figures for
the connection then "Confirm".
Enter this same code in the telephone then
accept the connection.
The system offers to connect the telephone:
- "Telephone" (hands-free kit, telephone
only),
- "Audio streaming" (streaming: wireless
playing of the audio files on the telephone),
- "Internet" (internet browsing, only if your
telephone is compatible with the Bluetooth
DUN (Dial-Up Networking) standard).
Select one or more profiles and confirm.
The services available depend on
the network, the SIM card and the
compatibility of the Bluetooth
used. Check the instructions for your
telephone and with your service provider
for the services to which you have access.
function in
The ability of the system to connect to just
one profile depends on the telephone. All
three profiles may connect by default.
Visit www.citroen.co.uk for more information
(compatibility, more help, etc.).
The recognised telephone appears in the list.
Depending on your telephone, you may be
asked to accept automatic connection every
time the ignition is switched on.
https://www.automotive-manuals.net/
Depending on the type of telephone, the
system will ask you to accept or decline
the transfer of your contacts.
If not, select "Update".
®
On returning to the vehicle, if the last telephone
connected is present again, it is automatically
recognised and within about 30 seconds
of switching on the ignition, the pairing is
established without any action on your part
(Bluetooth ® activated).
To change the automatic connection profile,
®
devices
select the telephone in the list then select the
desired profile.
Connecting a Bluetooth
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
connected when the ignition was last switched
off is automatically reconnected, if this
connection mode was activated during the
pairing procedure.
The connection is confirmed by the display of a
message and the name of the telephone.
7-inch touch screen tablet
®
.
15