CITROEN BERLINGO MULTISPACE Handbook page 123

Hide thumbs Also See for BERLINGO MULTISPACE:
Table of Contents

Advertisement

Operation
When your vehicle is too close to or
approaches the vehicle ahead too quickly, the
system automatically applies the brakes to
avoid a collision.
You are then warned by the display of a
message.
Your vehicle's brake lamps come on to warn
other road users.
The collision can be avoided if the speed
difference between your vehicle and
the one ahead is not more than 9 mph
(15 km/h).
Above this threshold, the system will do
what is possible to avoid or reduce the
accident by lowering the speed of impact.
The automatic braking can bring the vehicle to
a complete stop if the situation requires it.
In this case, the vehicle is held stationary
temporarily (for about 1.5 seconds) to allow
the driver to take back control by pressing the
brake pedal.
Unless the driver de-clutches quickly
enough during automatic braking,
triggering of the system may cause the
engine to stall.
During automatic braking, the driver can
always obtain a higher rate of deceleration
than that controlled by the system, by
pressing firmly on the brake pedal.
After an impact, the system is
automatically put out of service: it no
longer operates.
You must go to a CITROËN dealer or a
qualified workshop to have the system
made operational again.
Operating limits
The system only detects vehicles that are
stationary or moving in the same direction as
your vehicle.
It does not detect small vehicles (bicycles,
motorcycles), pedestrians or animals, nor
non-reflective stationary objects.
This system will not trigger or intervene if the
driver:
-
accelerates hard
-
or turns the steering wheel sharply
(avoidance manoeuvre).
https://www.automotive-manuals.net/
When weather conditions are difficult
(extremely heavy rain, snow, fog, hail,
etc.), braking distances increase, which
may reduce the system's ability to avoid a
collision.
The driver must therefore remain
particularly cautious.
Never let snow build up on the bonnet
or any object above the bonnet nor at
the front of the roof: this could enter the
field of vision of the sensor and obstruct
detection.
Deactivation
The system is deactivated in the vehicle
configuration menu, accessible with the ignition
on.
Its status is stored when the ignition is switched
off.
When the system is deactivated, a
message is displayed every time the
ignition is switched on, to warn you.
Driving
6
121

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Berlingo

Table of Contents