CITROEN BERLINGO MULTISPACE Handbook page 22

Instruments
For more information on Fuel, refer to the
corresponding section.
Coolant temperature
The needle is positioned before the red
zone: normal operation.
In arduous conditions of use or hot climatic
conditions, the needle may move close to the
red graduations.
What to do if the needle goes into the red
zone:
F Slow down the vehicle or let the engine idle.
20
What to do if the warning lamp lights up:
F stop immediately, switch off the ignition. The
fan may continue to operate for a certain
time up to approximately ten minutes,
F wait for the engine to cool down in order
to check the coolant level and top it up if
necessary.
Since the cooling system is under pressure,
follow these instructions to avoid any risk of
burns:
F wait at least one hour after the engine stops
to intervene,
F unscrew the cap by 1/4 of a turn to allow the
pressure to drop,
F when the pressure has dropped, check the
level in the expansion bottle,
F if necessary, remove the cap to top up.
If the needle remains in the red zone, have it
checked by a CITROËN dealer or by a qualified
workshop.
For more information on Levels, refer to
the corresponding section.
https://www.automotive-manuals.net/
AdBlue ® fluid range
indicators
Alert settings and display
Different levels of alert are triggered according
to the remaining driving range threshold.
You will be informed as each mileage threshold
is reached and the alerts will change from
temporary to permanent.
- The 1 st alert is triggered at a remaining
driving range of 1,500 miles (2,400 km).
- The 2 nd alert is triggered at a remaining
driving range of 350 miles (600 km).
Up to 0 km, at which point it will be impossible
to restart the engine after a stop.
Driving range
F Press this button to display
the information.
With the touch screen tablet:
F select the "Driving assistance"
menu,
F select "Diagnostic",
F select CHECK.
Above 3,000 miles (5,000 km), the value is not
defined.