CITROEN BERLINGO MULTISPACE Handbook page 101

The ISOFIX child seats are fitted with two
latches which are secured on the two front
rings A.
Some also have an upper strap which is
attached to rear ring B.
To secure the child seat to the Top Tether:
- remove and stow the head restraint before
installing a child seat on this seat (refit it
once the child seat has been removed),
- run the strap of the child seat behind the top
of the seat backrest, centring it between the
holes for the head restraint rods,
- fix the hook on the end of the upper strap to
rear ring B,
- tighten the upper strap.
The incorrect installation of a child seat in
a vehicle compromises the protection of
the child in the event of an accident.
Strictly follow the fitting instructions
provided in the installation guide supplied
with the child seat.
For information on the possibilities for
installing ISOFIX child seats in your
vehicle, refer to the locations table.
Recommended ISOFIX seat
RÖMER Duo Plus ISOFIX
(size category: B1)
Group 1: 9 to 18 kg
Installed only in the "forward facing" position.
Attaches to rings A and ring B, referred to as
the Top Tether, using an upper strap.
3 seat body angles: sitting, reclining and lying
down.
This child seat can also be used on seats
not equipped with ISOFIX mountings. In
this case, it must be secured to the vehicle's
seat by the three-point seat belt. Follow the
instructions on how to install the child
seat provided in the seat manufacturer's
installation guide.
https://www.automotive-manuals.net/
Locations of ISOFIX child
seats
In line with European regulations, this table
indicates the options for installing ISOFIX child
seats on the vehicle seats fitted with ISOFIX
mountings.
In the case of the universal and semi-universal
ISOFIX child seats, the child seat's ISOFIX size
category, designated by a letter from A to G, is
indicated on the child seat next to the ISOFIX
logo.
Safety
5
99