Parking Sensors - CITROEN BERLINGO MULTISPACE Handbook

Hide thumbs Also See for BERLINGO MULTISPACE:
Table of Contents

Advertisement

Driving
With monochrome screen C
F Press the MENU button for access to the
main menu.
F Select "Personalisation-Configuration".
F Select "Define the vehicle parameters".
F Select "Driving assistance".
F Select "Automatic emergency braking:
OFF" or "Automatic emergency braking:
ON".
F Press the "7" or "8" button to tick or
untick the box and respectively activate or
deactivate the system.
F Press the "5" or "6" button, then the OK
button to select the "OK" box and confirm or
the Back button to cancel.
With the touch screen tablet
F Press the "MENU" button.
F Select the "Driving" menu.
F In the secondary page, select "Vehicle
parameters".
F Select the "Driving assistance" tab.
F Tick or untick the "Automatic emergency
braking" box to activate or deactivate the
system.
F Confirm.
122
Operating faults
Sensor fault
The operation of the laser sensor may suffer
interference from accumulations of dirt or
misting of the windscreen. In this case you are
warned by the display of a message.
Use windscreen demisting and regularly clean
the area of the windscreen in front of the
sensor.
Do not stick or otherwise attach any object
on the windscreen in front of the sensor.
System fault
In the event of a malfunction of the system, you
are warned by an audible signal and the display
of the message "Automatic braking system
fault".
Have the system checked by a CITROËN
dealer or a qualified workshop.
In the event of an impact to the
windscreen at the sensor, deactivate the
system and contact a CITROËN dealer
or a qualified workshop to have your
windscreen replaced.
https://www.automotive-manuals.net/
Do not attempt to remove, adjust or test
the sensor.
Only a CITROËN dealer or a qualified
workshop is able to work on the system.
When towing a trailer or when the vehicle
is being towed, the system must be
deactivated.

Parking sensors

The audible (front and rear) and/or visual (rear)
parking sensor system consists of proximity
sensors installed in the bumpers.
They detect any obstacle which enters the field
of vision (person, vehicle, tree, fence, etc.)
behind the vehicle during the manoeuvre.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Berlingo

Table of Contents