Standard Tray Paper Feed Clutch Replacement - Ricoh STINGER-C1 Service Manual

17 May, 1999

6.6.3 STANDARD TRAY PAPER FEED CLUTCH REPLACEMENT

Preparation
1) Remove the rear cover. (Refer to Rear Cover Removal, section 6.1.1.)
2) Remove the main motor and gear box. (Refer to Main Motor/Gear Box
Replacement, section 6.7.1.)
3) Remove the AIO.
[A]
[B]
1. Remove the paper feed roller. (Refer to Paper Feed Roller Replacement,
section 6.6.1.)
2. While unhooking the hook [A], pull the shaft [B] out to the left.
3. Replace the tray paper feed clutch [C] (1 connector on the engine control
board).
NOTE: Do not remove the bushing for the paper feed roller shaft at the rear,
because it may not be possible to reinstall it.
6-25
PAPER FEED
[C]
A250R707.WMF