Sim Card - Siemens SICHARGE CC AC22-MID Operating Instructions Manual

Connection and commissioning

5.3 SIM card

5.3 SIM card
The charging station uses the SIM card to establish a connection to the backend. The SIM card
used must be able to operate in a closed APN. Otherwise, the communication to the charging
station is not secure.
To order SIM cards, you can select them in the order options. Another option is setting up in
the factory with a connection test to the backend provider.
Requirement
When working on the SIM card, follow the instructions below:
1. Open the charging station
2. Disconnect the charging station from the mains
3. Check the activation
4. Put on ESD clothing and use an ESD grounding wrist strap connected to the protective
conductor
Insert/remove SIM card
Follow the instructions below to insert or remove the SIM card:
1. Remove the two screws from the card cover of the charging controller
①
2. Remove the card cover from the charging controller
42
Card cover
SICHARGE Operating Instructions MID
Operating Instructions, 07/2020, A5E48573001-AB