Siemens SICHARGE CC AC22-MID Operating Instructions Manual page 105

Appendix
A.5 Option: SCHUKO socket
Operating the charge point
The charge point automatically detects the interface to which a consumer was connected.
Only this interface is supplied with energy when the charging starts.
Note
You can draw energy via either the SCHUKO socket or the type 2 connection.
Only one connection can be operated at one charge point at any given time.
A fault message is output when you try using both connections of a charge point.
Charging
The process is identical to charging at the type 2 socket.
The maximum output is 3.7 kWh.
The procedure is described in section Charging (Page 69).
104
SICHARGE Operating Instructions MID
Operating Instructions, 07/2020, A5E48573001-AB