Siemens SICHARGE CC AC22-MID Operating Instructions Manual page 34

The keys for the unit and the control cabinet are on the right.
To open the housing, follow these steps:
1. Turn the unit key to the right. Hold the key in this position.
2. To unlock the door, turn the switch cabinet key to the right.
Mounting the charging station onto the concrete foundation
1. Remove the infeed cover.
2. Do not lift the charging station by yourself.
3. Feed the cables through the openings in the base plate.
4. Place the charging station on the mounting plate, drilled holes, or four threaded rods.
5. Mount a A13 washer and a M12 nut onto each threaded rod, or drive the anchors into the
drilled holes.
6. Align the charging station using a spirit level.
7. Tighten the nuts. The tightening torque is 40 Nm.
8. Cut/punch out the plastic cable entry for the cable(s) used.
The cable entry must completely enclose the cable.
9. Route the cable(s) through the sealing plate.
SICHARGE Operating Instructions MID
Operating Instructions, 07/2020, A5E48573001-AB
Mounting/assembly
4.3 Assembly procedure
33