Installation; Installation (When The Expansion Board/Connector Conversion Adapter Is Not Used Together) - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
21.3

Installation

Be sure that the power is OFF when installing the memory cassette.
21.3.1 Installation
(when the expansion board/connector conversion adapter is not used together)
The FX -40MT/ES is used as the main unit in this example.
3G
1
Remove the top cover.
Remove the top cover (A in the right figure) as shown in the
right figure.
2
Attach the side cover.
Attach the side cover (B in the right figure) as shown in the
right figure.
Caution:
- Make sure to attach the side cover before the memory
cassette. However, attachment of the side cover is not
necessary when using only the loader function and not always
connecting the memory cassette.
- Attachment of the side cover is not necessary when installing
the memory cassette under the top cover (S) of a 40/60-point
type main unit.
3
Raise the memory cassette detachment lever.
Raise the memory cassette detachment lever ("C").
4
Attach the memory cassette.
Install the memory cassette to the main unit.
380
21 Memory Cassette
21.3 Installation
Top cover (S)
B
C
4
A
1
3