Connection To Built-In Programming Connector (Usb) - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
3. For continuous use of a peripheral device (such as GOT) (using the connector conversion
adapter)
Cut off the area shown in the left figure below of the connector conversion adapter using a nipper, etc., and
connect the peripheral device as shown in the right figure below.
Cut off the dotted
line area.

14.1.3 Connection to built-in programming connector (USB)

Connect and disconnect the communication cable for the peripheral device (personal computer).
At connection, confirm the cable and connector shape.
USB Mini-B
plug
202
Communication
cable
Programming
connector
(USB)
USB
Mini-B
connector
14 Test Operation, Adjustment, Maintenance and Troubleshooting
Connection example
14.1 Preparation for Test Operation