Product Configuration - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition

20.1.1 Product configuration

The connection destinations shown below are products which can be connected by "connector
cables. An individual-wire type can also be used for wiring to the terminal blocks of PLC-side input/output
products.
Model Name
FX-16E-TB
FX-32E-TB
*2
FX-16EX-A1-TB
*3
FX-16EYR-TB
3
FX-16EYS-TB*
*3
FX-16EYT-TB
*3
FX-16EYT-H-TB
*1. A power supply for the input circuit is required when connected to the FX
The current consumption is shown in the table below.
FX -16EX-C
2N
*2. The applications shown below are not supported.
High-speed
processing
Time division
inputs
Other
*3. The applications shown below are not supported.
Pulse outputs
Time division
inputs
Time division
output
*4. A power supply for the input circuit is required when connected to the FX
The current consumption is shown in the table below.
FX 2N -16EX-C
Number of
Number of
Output
Input Points
Points
16 input points or
16 output points
32 input points,
32 output points,
or 16 input & 16 output points
16 -
- 16
- 16
- 16
- 16
Power Supply Voltage
24V DC
High-speed counter, input interruption, pulse catch, pulse width/pulse period measurement, speed detection
(SPD) instruction
Input matrix (MTR) instruction, digital switch (DSW) instruction
Absolute current value read (ABS) instruction
Pulse Y output (PLSY) instruction, acceleration/deceleration setup (PLSR) instruction, pulse width modulation
(PWM) instruction, DOG search zero return (DSZR) instruction, batch data positioning mode (TBL) instruction,
absolute current value read (ABS) instruction, zero return (ZRN) instruction, variable speed pulse output (PLSV)
instruction, drive to increment (DRVI) instruction, drive to absolute (DRVA) instruction
Input matrix (MTR) instruction, digital switch (DSW) instruction
Seven segment with latch (SEGL) instruction
Power Supply Voltage
24V DC
Function Connection Destination
Connects directly to
FX 2N -16EX-C (sink input)
PLC input/output
FX -16EYT-C (sink output)
2N
terminals.
100V AC input type FX -16EX-C (sink input)
2N
Relay output type FX 2N -16EYT-C (sink output)
Triac output type FX -16EYT-C (sink output)
2N
Transistor output (sink)
FX 2N -16EYT-C (sink output)
type
Transistor output (sink)
FX -16EYT-C (sink output)
2N
type
Current Consumption
112mA
Unsupported Applications
Unsupported Applications
Current Consumption
160mA
20 Terminal Block
20.1 Outline
connector"
Drive Power
Supply
*1
*4
24V DC 80mA
24V DC
112mA
24V DC
112mA
24V DC
112mA
-16EX-C.
2N
-16EX-C.
2N
359
11
12
13
14
15
16
17
18
19
20