Weider WESY85070 User Manual page 7

8. Attach the upper ends of the Weight Guides (72) to
the Top Frame (67) with the 5/16Ó x 6Ó Bolt (74), two
1/2Ó x 3/4Ó Spacers (73), and a 5/16Ó Nylon Locknut
(3).
Tighten all Nylon Locknuts used in steps 4
through 8.
9. Press two 1 3/4Ó Square Inner Caps (44), two 1 1/2Ó
Square Inner Caps (32), and two 1Ó Round Inner
Caps (49) into the Arm Frame (52).
10. Lubricate the upper axle on the Arm Frame (52).
Hold the axle between the two Arm Frame
Bushings (68). Set the Arm Frame Bushings and
the Arm Frame on the welded plate on the Top
Frame (67). Place the Arm Frame Bracket (69) over
the Arm Frame Bushings. Attach the Arm Frame
Bracket to the Top Frame with four 1/4Ó x 1/2Ó
Screws (31) and 1/4Ó Nylon Jam Nuts (86). The
indicated bracket on the Arm Frame must face
forward.
8
73
85
67
74
72
9
49
10
31
69
7
3
32
52
44
Lubricate
68
52
67
Bracket
86