Weider WESY49202 User Manual page 16

34. Wrap the Military Press Cable (72) around a
"V"-Pulley (50). Attach the Pulley to the Top
Frame (55) with an M10 x 55mm Bolt (86)
and an M10 Nylon Locknut (21).
Wrap the Military Press Cable (72) around a
90mm Pulley (15). Attach the Pulley to the
indicated bracket on the Assist Arm (105) with
an M10 x 45mm Bolt (76) and an M10 Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
35. Wrap the Military Press Cable (72) around a
"V"-Pulley (50). Attach the Pulley and a Long
Cable Trap (31) to the Assist Upright (74) with
an M10 x 105mm Bolt (112), an M10 Washer
(9), and an M10 Nylon Locknut (21). Be sure
that the Long Cable Trap is turned to hold
the Cable in place and that the Cable is
routed around the Pulley as shown.
Wrap the Military Press Cable (72) around a
90mm Pulley (15). Attach the Pulley to the
other bracket on the Assist Arm (105) with an
M10 x 45mm Bolt (76) and an M10 Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
34
76
15
Bracket
105
35
112
105
Bracket
16
55
50
21
86
72
21
74
31
50
21
9
72
76
15