Weider WESY49202 User Manual page 15

31. Attach the end of the Low Cable (23) to the
Long "U"-Bracket (57) with an M8 Nylon
Locknut (3) and an M8 Washer (8). Do not
completely tighten the Nylon Locknut. It
should be threaded onto the end of the
Cable so only a couple of threads are
showing above the Nylon Locknut, as
shown in the inset drawing.
32. Attach the High Cable (58) to a Small "U"-
Bracket (71) with an M8 Washer (8) and an
M8 Nylon Locknut (3). Do not completely
tighten the Nylon Locknut. It should be
threaded onto the end of the Cable only a
couple of turns, as shown in the inset
drawing.
Attach the Small "U"-Bracket (71) to the Short
Weight Tube (108) with an M8 x 45mm Bolt
(24) and an M8 Nylon Locknut (3).
33. Locate the Military Press Cable (72). Attach
the Military Press Cable to the other Small
"U"-Bracket (71) with an M8 Washer (8) and
an M8 Nylon Locknut (3). Do not completely
tighten the Nylon Locknut. It should be
threaded onto the end of the Cable only a
couple of turns, as shown in the inset
drawing.
Attach the Small "U"-Bracket (71) to the Long
Weight Tube (63) with an M8 x 45mm Bolt
(24) and an M8 Nylon Locknut (3).
31
3
3
8
57
23
32
58
3
71
108
58
71
8
3
33
3
63
72
71
8
3
15
57
8
23
24
8
3
72
71
24
8
3