Power Input - EverFocus MoniVue System ESN41 Quick Installation Manual

2.3.1

Power Input

You can connect the video recorder to a power source through PoE (ESN41 FHD only) or
power port.
PoE: Connect the video recorder to a PoE switch. Note that only ESN41 FHD supports PoE
function.
Power Port: Connect the video recorder to a 12VDC power source using the supplied Power
Adaptor.
2.3.2 D-Sub Cable
You can connect the video recorder to 4 cameras, 4 audio inputs, 1 audio output and 1 BNC
monitor using the supplied D-Sub Cable. Please refer to the cable labels to identify each
cable.
Note:
1. Connect the 4 cameras to the 4 video inputs (mini-DIN cables) and the power will be
supplied to the cameras.
2. The connected speakers/microphones require a (built-in) amplifier and external power
supply.
3. The RS-232 function is currently reserved.
PoE Switch Power Adaptor
• Video Input x 4 (Mini DIN)
• Video Output x 1 (BNC)
• Audio Input x 4 (RCA)
• Audio Output x 1 (RCA)
D-Sub Cable
• RS-232 (reserved)
10
MoniVue System – Video Recorder