Download Print this page
Weider 831.154021 User Manual
Weider 831.154021 User Manual

Weider 831.154021 User Manual

Weight system exerciser

Advertisement

Quick Links

®
Model No. 831.154021
Serial No.
Write the serial number in the
space above for reference.
Serial Number Decal (under seat)
, Assembly
, Adjustments
, Troubleshooting
, Part List and Drawing
WEIGHT SYSTEM EXERCISER
User's Manual
,_CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment.
Save this manu-
al for future reference.
Patent Pending
Sears, Roebuck and Co., Hoffman Estates, IL 60179

Advertisement

loading

Summary of Contents for Weider 831.154021

  • Page 1 Model No. 831.154021 Serial No. Write the serial number in the space above for reference. Serial Number Decal (under seat) , Assembly , Adjustments , Troubleshooting , Part List and Drawing ,_CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
  • Page 2 TABLE OF CONTENTS WARNING DECAL PLACEMENT IMPORTANT PRECAUTIONS BEFORE YOU BEGIN ... ASSEMBLY ADJUSTMENTS WEIGHT RESISTANCE CHART ... CABLE DIAGRAM ... MAINTENANCE EXERCISE GUIDELINES ORDERING REPLACEMENT PARTS ... FULL 90-DAY WARRANTY Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED this manual.
  • Page 3 iMPORTANT PRECAUTIONS kWARNING: To reduce the risk of serious injury, read the following before using the weight system. Read all instructions in this manual before using the weight system. Use the weight sys- tem only as described in this manual. it is the responsibUity of the owner to ensure that all users of the weight system are ade- quately informed of all precautions.
  • Page 4 (1-800-469-4663). To help us assist you, please note the product model number and serial number before calling. The model number is 831.154021. The serial number can be found on a decal attached to the sys- weight system (see the front cover of this manual for the location of the decal).
  • Page 5 ASSEMBLY Make Assembly Easier for Yourself Everything in this manual is designed to ensure that the weight system can be assem- bled successfully by anyone. Before begi n= ning assembly, make sure to read the information on this page. This brief intro- duction will save you much more time than it takes to read it.
  • Page 6 Frame Assembly Before beginning assembly, understand the information in the box on page 5, See the PART iDENTiFiCATION CHART in the center of this manua ! f0r help identifying small parts. Insert four M8 x 75mm Carriage Bolts (69) up through the Right Base (1).
  • Page 7 See drawing A. Attach the Right Upright (2) to the Right Base (1) with the two indicated M8 x 75mm Carriage Bolts (69) and two M8 Nylon Locknuts (91). Do not tighten See drawing B. Attach the Left Upright (26) to the Left Base (25) with the two indicated M8 x 75mm Carriage Bolts (69) and two M8 Nylon Locknuts (91).
  • Page 8 Attach the Left Seat Frame (27) to the Left Base (25) with the two indicated M8 x 75mm Carriage Bolts (69) and two M8 Nylon Locknuts (91). Do not tighten the Locknuts yet. Attach the Left Seat Frame (27) to the Left Upright (26) with two M8 x 78mm Bolts (82), two M8 Washers (98), and two M8 Nylon Locknuts (91).
  • Page 9 Slide two Weight Bumpers (45) onto the Weight Guides (44). Slide the eight Weights (55), with the pin holes on the indicated side, onto the Weight Guides. Press the Weight Tube Bumper (46) into the Weight Tube (47). Insert the Weight Tube into the stack of Weights (55).
  • Page 10 12. Attach the Left Top Frame (36) to the Right Top Frame (5) with four M8 x 78mm Bolts (82), two M8 Washers (98), a Support Plate (31), and four M8 Nylon Locknuts (91). Do not tighten the Locknuts yet. 13.
  • Page 11 16. Attach the Leg Bumper (59) to the Right Seat Frame (3) with an M4 x 16mm Self-tapping Screw (89) and an M4 Washer (96). Grease an M10 x 75mm Bolt (60). Attach the Leg Lever (4) to the Right Seat Frame (3) with the Bolt and an M10 Nylon Locknut (90).
  • Page 12 19. Attach a Press Arm (30) to the Press Frame (29) with two M8 x 69mm Bolt (86) and two M8 Nylon Locknuts (91). Repeat this step with the other Press Arm (30). 20. Grease an M10 x 108mm Bolt (72). Attach the Leg Press Frame (28) to the Left Base (25) with the Bolt and an M10 Nylon Locknut (90).
  • Page 13 23. Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an MIO Washer (99) to the Left Seat Frame (27) with an MIO x 103mm Bolt (22) and an MIO Nylon Locknut (90).
  • Page 14 27. Wrap the Press Cable (109) around a "V"-pulley (62). Attach the "V"-pulley, two Half Finger Guards (66), a Large Cable Trap (111), and an MIO Washer (99) inside the bracket on the Left Upright (26) with an MIO x 65mm Bolt (77) and an M10 Nylon Locknut (90).
  • Page 15 31. Attach the end of the Press Cable (109) to a "U'- bracket (50) with an M8 Washer (98) and an M8 Nylon Locknut (91). Note: Do not completely tighten the Locknut; it should that only two threads of the Cable show past the Locknut, as shown in the inset drawing.
  • Page 16 36. Grease an M8 x 22mm Shoulder Bolt (39). Attach the Butterfly Cable (106) to the Right Butterfly Arm (7) with the Bolt and an M8 Nylon Locknut (91). Make sure the fiat edge of the Cable is against the Butterfly Arm.
  • Page 17 41. Route the Weight Cable (110) over a 90mm Pulley (63) and down through the Right Top Frame (5). Attach the Pulley inside the Top Frame with an MIO x 80mm Bolt (75), two MIO Washers (99), two MIO x 19mm Spacers (102), and an MIO Nylon Locknut (90).
  • Page 18 46. Locate the Ab Cable (107). Route the small ball on the Cable through the Leg Lever (4) and the Right Seat Frame (3). Make sure the Cable is over the rod in the Seat Frame. Attach a 90mm Pulley (63) inside the Leg Lever (4), over the Ab Cable (107), with an MIO x 65mm Bolt (77), two MIO Washers (99), two MIO x 12mm Spacers (101), and an MIO Nylon...
  • Page 19 50. Wrap the Ab Cable (107) under a 90mm Pulley (63). Attach the Pulley, a Cable Trap (68), and two Half Finger Guards (66) to the Right Base (1) with an MIO x 50mm Bolt (64) and an MIO Nylon Locknut (90).
  • Page 20 55. Wrap the Ab Cable (107) over a 90mm Pulley (63). Attach the Pulley and the two Quarter Finger Guards (105) to the Right Upright (2) with an MIO x 108mm Bolt (72), an M10 Washer (99), and an MIO Nylon Locknut (90). Make sure that the rod is inserted through both Finger Guards and is over the Cable.
  • Page 21 59. Attach the Butterfly Backrest (9) to the Right Upright (2) with four M6 x 16mm Screws (88). 60. Press the two Shroud Covers (11) onto the Shroud (10). Attach the Shroud to the Right Top Frame (5) and the Center Base (52) with four M6 x 22mm Bolts (87), four M6 Washers (97), and four M6 Nylon Locknuts (92).
  • Page 22 61. Attach the Lock Plate (21) to the Right Seat Frame (3) with an M8 x 68mm Shoulder Bolt (41), an M8 Washer (98), and an M8 Nylon Locknut (91). Do not overtighten the Locknut; Plate must be able to pivot easily. Attach the Leg Pin (24) to the Right Seat Frame (3) with an M4 x 16mm Self-tapping Screw (89).
  • Page 23 ADJUSTMENTS This section explains how to adjust the weight system. See the EXERCISE GUIDELINES on page 29 for important information about how to get the most benefit from your exercise program. Also, see the accompanying exercise guide to see the correct form for each exercise. Make sure all parts are properly tightened each time the weight system is used.
  • Page 24 ADJUSTING THE BACKREST To adjust the position of the Press Backrest (113), disengaging the Knob (43) from the Left Upright (26) and move the Backrest to the desired position. Reengage the Knob into the Left Upright and the Backrest Frame (53). Make sure the Knob is fully tightened.
  • Page 25 WEIGHT RESISTANCE The chart below shows the approximate weight resistance at each exercise station. "Top" refers to the 6 lb. top weight. The other numbers refer to the 12.5 lb. weight plates. Weight resistance shown for the butterfly arm sta- tion is for each arm.
  • Page 26 CABLE DIAGRAMS The cable diagrams below show the proper routing of the Butterfly Cable (106), the Ab Cable (107), the Short Cable (108), the Press Cable (10% and the Weight Cable (110). Use the diagram to make sure that the cables and the cable traps have been assembled correctly.
  • Page 27 Weight CabJe (110) Length: 12 feet 1 inch Press Cable (109) Length: 22 feet 6 inches...
  • Page 28 MAINTENANCE Make sure all parts are properly tightened each time the weight system is used. Replace any worn parts imme- diately. The weight system can be cleaned with a damp cloth and a mild, non-abrasive detergent. solvents. TiGHTENiNG THE CABLES Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used.
  • Page 29 EXERCISE GUiDELiNES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building To increase the size and strength of your muscles, push them close to their maximum capacity. Your mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise. You can adjust the intensity level of an individual exercise in two ways: •...
  • Page 30 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out.
  • Page 31 MONDAY EXERCISE Date: AEROBIC EXERCISE TUESDAY Date: WEDNESDAY EXERCISE Date: AEROBIC EXERCISE THURSDAY Date: FRIDAY EXERCISE Date: Make photocopies of this page for scheduling and recording your workouts. WEIGHT WEIGHT WEIGHT SETS REPS SETS REPS SETS REPS...
  • Page 32 M8 Nylon Locknut (91) MIO Nylon Locknut (90) M12 Nut (49) M12 Washer (33) MIO Large Washer (100) CHART--Model No. 831.154021 M4 Washer (96) M6 Washer (97) M8 Washer (98) MIO Washer (99) by each drawing is If a part...
  • Page 33 M6x 35mm Screw(78) M8x 22mm Shoulder B olt(39) M6x 22mmBolt(87) M6x 16mm Screw(88) M4x 16mm Self-tapping S crew (89) MIO x 77mm Bolt (76) M8 x 78mm Bolt (82) M8 x 75mm Carriage Bolt (69)_ MIO x 80mm Bolt (75) M8 x 86mm Shoulder Bolt (37) MIO x 85mm Bolt (74) M8 x 96mm Bolt (83)
  • Page 34 PART LIST--iVlodei No. 831.154021 Key No. Qty. Description Right Base Right Upright Right Seat Frame Leg Lever Right Top Frame Left Butterfly Arm Right Butterfly Arm Seat Butterfly Backrest Shroud Shroud Cover 50mm Round Inner Cap Lat Bar Butterfly Frame...
  • Page 35 EXPLODED DRAWING--Model © No. 831.154021 9o_.I_ _ -88 ' "'- "'-. RO904A 90-_...
  • Page 36 i639( 90 6'6 _--81 79 34_) t-113 99 66 _\ 90...
  • Page 37 For repair - in your home - of all major brand appliances, iiiiiiiiiiiiiii or heating and cooling iiiiiiiiiiiiiii iiiiiiiiiiiiiii For the replacement parts, accessories, iiiiiiiiiiiiiii iiiiiiiiiiiiiii For Sears professional iiiiiiiiiiiiiii iiiiiiiiiiiiiii and items like garage door openers iiiiiiiiiiiiiii iiiiiiiiiiiiiii 1-800-4-MY-HOM iiiiiiiiiiiiiii (1-800-469-4663) iiiiiiiiiiiiiii...

This manual is also suitable for:

Pro 4250