Part Identification Chart - Weider 831.150380 User Manual

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in
the parts bags, check to see if it has been pre-assembled.
M8 Nylon Locknut (7)–17
M10 Nylon Locknut (4)–6
1 1/2" Round Inner Cap (14)–2
M8 Washer (2)–6
M10 Washer (13)–4
1" Round Inner Cap (21)–3
14mm x 15mm Spacer (11)–4
1" Angled Round Cap (32)–1
3/4" Round Inner Cap (25)–6
M8 x 50mm Bolt (1)–2
M6 x 16mm Screw (6)–6
M8 x 68mm Bolt (8)–7
M8 x 48mm Carriage Bolt (3)–6
M10 x 75mm Bolt (5)–4 M10 x 70mm Bolt (12)–2
M4 x 25mm Screw (44)–1
M10 x 63mm Bolt (19)–1
5