Weider 831.150380 User Manual page 10

13. Lubricate an M10 x 75mm Bolt (5). Attach the
Backrest Brackets (38) to the Bench Frame (33)
with the M10 x 75mm Bolt and an M10 Nylon
Locknut (4). Do not overtighten the Nylon
Locknut.
Rest the Backrest Brackets (38) on the Adjustment
Tube (37).
14. Attach the Seat (35) to the Bench Frame (33) with
two M6 x 16mm Screws (6).
15. Press 3/4" Round Inner Caps (25) into the ends of
all three Pad Tubes (27).
Insert a Pad Tube (27) through the indicated hole in
the Leg Lever (28). Insert another Pad Tube through
the other hole in the Leg Lever. Insert the remaining
Pad Tube through the hole in the Front Leg (20).
Slide two Foam Pads (26) onto each Pad Tube (27).
13
14
6
15
26
27
25
26
10
37
38
33
5
Lubricate
35
33
26
28
27
25
26
27
20
4
26