Shure MXA310 Manual page 9

Table array microphone

Hide thumbs Also See for MXA310:

Table of Contents

Shure Incorporated

① Array microphone to Shure MXWANI

Connect the microphone output to port 1 on the MXWANI with a network cable. Port 1 provides the necessary

Power over Ethernet (PoE).

② Computer to Shure MWXANI

Connect a computer to the ANI on port 2 or 3 with a network cable to provide control of the array microphone and

other networked components.

③ Shure ANI analog outputs to audio processor

Step 1: Route signals with Dante Controller software

Route the channels from the microphone (Dante transmitter) to the MXWANI channels (Dante receiver). This es

tablishes the discrete channels to deliver through the analog outputs.

Step 2: Connect the MXWANI outputs to the processing device inputs

Block connector outputs on the MXWANI send balanced audio signals to the inputs on the processing device,

which provides digital signal processing (such as acoustic echo cancellation).

④ Connection to far end

Connect the audio processor to a VOIP server or telephone line to send and receive audio between the near end

and far end.

⑤ Audio from far end to amplifier

Route the far end audio through the audio processor output to an amplifier.

⑥ Amplified audio signal to loudspeakers

Connect the loudspeakers to the amplifier to hear the audio from the far end.

9/76

Table of Contents