Table of Contents
Advertisement
Get Output Clip Status
Command String:
< GET x AUDIO_OUT_CLIP_INDICATOR >
MXA310 Response:
< REP x AUDIO_OUT_CLIP_INDICATOR ON >
< REP x AUDIO_OUT_CLIP_INDICATOR OFF >
Flash Lights on Microphone
Command String:
< SET FLASH ON >
< SET FLASH OFF >
MXA310 Response:
< REP FLASH ON >
< REP FLASH OFF >
Turn Metering On
Command String:
< SET METER_RATE sssss >
MXA310 Response:
< REP METER_RATE sssss >
< SAMPLE aaa bbb ccc ddd eee >
Where x is ASCII channel number: 1
through 5. See table on page 1. It is
not necessary to continually send
this command. The microphone will
send a REPORT message whenev
er the status changes.
The MXA310 will respond with one
of these strings.
Send one of these commands to the
MXA310. The flash automatically
turns off after 30 seconds.
The MXA310 will respond with one
of these strings.
Where sssss is the metering speed
in milliseconds. Setting sssss=0
turns metering off. Minimum setting
is 100 milliseconds. Metering is off
by default.
Where aaa, bbb, etc is the value of
the audio level received and is
000-060.
aaa= output 1
bbb= output 2
ccc= output 3
ddd= output 4
eee= output 5
Shure Incorporated
46/76
Advertisement
Table of Contents
