Shure MXA310 Manual page 43

Command String:
< GET x AUDIO_GAIN_HI_RES >
MXA310 Response:
< REP x AUDIO_GAIN_HI_RES yyyy >
Set Audio Gain
Command String:
< SET x AUDIO_GAIN_HI_RES yyyy >
MXA310 Response:
< REP x AUDIO_GAIN_HI_RES yyyy >
Increase Audio Gain by n dB
Command String:
< SET x AUDIO_GAIN_HI_RES INC nn >
MXA310 Response:
< REP x AUDIO_GAIN_HI_RES yyyy >
Decrease Audio Gain by n dB
Command String:
< SET x AUDIO_GAIN_HI_RES DEC nn >
MXA310 Response:
< REP x AUDIO_GAIN_HI_RES yyyy >
Get Post-Gate Audio Gain (firmware > v3.0)
Command String:
< GET x AUDIO_GAIN_POSTGATE >
Where x is ASCII channel number: 1
through 5. Channel number 0 (all
channels) is not valid for this com­
mand.
Where yyyy takes on the ASCII val­
ues of 0000 to 1400. yyyy is in steps
of one-tenth of a dB.
Where yyyy takes on the ASCII val­
ues of 0000 to 1400. yyyy is in steps
of one-tenth of a dB.
Where yyyy takes on the ASCII val­
ues of 0000 to 1400.
Where nn is the amount in one-tenth
of a dB to increase the gain. nn can
be single digit ( n ), double digit
( nn ), triple digit ( nnn ).
Where yyyy takes on the ASCII val­
ues of 0000 to 1400.
Where nn is the amount in one-tenth
of a dB to decrease the gain. nn can
be single digit ( n ), double digit
( nn ), triple digit ( nnn ).
Where yyyy takes on the ASCII val­
ues of 0000 to 1400.
Where x is ASCII channel number: 1
through 4. Channel number 0 (all
channels) is not valid for this com­
mand.
Shure Incorporated
43/76