Advertisement
6.3.7. Password Setting (administrator password)
Set or change the administrator password.
1.
Touch the [Password Setting] on the "Initial Setting" screen. The
"Password Setting" screen is displayed.
Then touch the [Change Password] on the "Password Setting"
screen. The "Change Password" screen is displayed.
2.
Enter the current password, then touch the [OK].
The default password is "0000" (4 digits).
3.
Enter the new password, then touch the [OK]. It returns to the
"Password Setting" screen.
1.
2.
Password Setting
Password Verification
Enter Current Password
Change Password
0
CL
Change Setting
5
Back
Cancel
4.
Touch the [Change Setting] on the
"Password Setting" screen. The "Change
Setting" screen is displayed.
5.
The "Change Setting" screen is 3 or 4
pages, they can be switched by the [Previ-
ous Page] or [Next Page]. Items set to be
[On] require the administrator password to
open the setting screen.
Change Setting
Change Setting
Page 2/ 4
Weekly Timer
[On]
Anti Freeze
Set Temp. Auto Return
[On]
Human Sensor Setting
Set Temp. Range Setting
[On]
Fan Control for Energy Saving
Previous
Next
Previous
Cancel
OK
Cancel
Page
Page
Page
Items that indoor unit does not support are not displayed.
6.
Touch the relevant item to display the setting screen. Touch [OK]
after touching [On] to return to the "Change Setting" screen. Touch
[OK] on the "Change Setting" screen after setting relevant items to
return to the password setting screen.
7.
Touch the [Back] on the "Password Setting". It returns to the "Initial
Setting" screen.
6.
7.
On Timer
Password Setting
On
Change Password
Off
Cancel
OK
6.3.8. Display Item Setting
• Filter Sign
Set to "Visible" to display icons on the "Monitor mode screen" during the
indoor unit fi lter cleaning period.
1.
Touch the [Display Item Setting] on the "Initial Setting" screen. The
"Display Item Setting" screen is displayed.
Then touch the [Filter Sign] on the "Display Item Setting" screen. The
"Filter Sign" screen is displayed.
2.
Touch [OK] after touching [Visible] or [Invisible] to return to the "Display
Item Setting" screen.
1.
2.
Display Item Setting
Filter Sign
Filter Sign
[Visible]
Room Temp.
[Invisible]
Cancel
OK
Cancel
• Room Temp.
Set to "Visible" to display the room temperature detected by this unit on
the monitor screen.
3.
Touch the [Room Temp.] on the "Display Item Setting" screen. The
"Room Temp." screen is displayed.
4.
Touch [OK] after touching [Visible] or [Invisible] to return to the
"Display Item Setting" screen.
5.
Touch the [OK] on the "Display Item Setting". It returns to the "Initial
Setting" screen.
3.
Change Password
Enter New Password
1
2
3
4
0
1
2
CL
6
7
8
9
5
6
7
OK
Cancel
Password Setting
Change Password
Change Setting
Back
Change Setting
On Timer
Off Timer
Auto Off Timer
Next
Cancel
Page
Page 3/ 4
Change Setting
[On]
Initial Setting
[On]
Maintenance
[On]
Next
Previous
OK
Cancel
Page
Page
Change Setting
Back
Visible
Invisible
OK
3.
Display Item Setting
Filter Sign
Room Temp.
[Invisible]
Cancel
OK
6.3.9. RC Master/Slave Setting
If multiple remote controllers are set for a remote-control group or for
a single indoor unit, it is necessary to set the remote-controller master.
This setting will be required at the time of initial start-up during installa-
tion. However, this setting can be changed afterwards. No master remote
controllers will be automatically set to be slaves. The following functions
can be used with slave remote controllers.
3
4
For the method of confi guration, refer to 6.2.3. RC Master Slave Setting.
8
9
Setting. Touch [OK] on the "RC Master/Slave Setting" screen after setting
OK
the temperature units to return to the "Initial setting" screen.
Do not perform "RC Master/Slave Setting" during setting or operating from
the Master unit.
6.3.10. I.U. Display Number Setting
At initial starting, the display numbers (Unit X) of the indoor units displayed
Page 1/ 4
at the "Individual VT Hold" setting of this remote controller are automati-
[Off]
cally allocated in ascending order of address value. (For the indoor unit
[Off]
display number (Unit X), refer to "3-2-3 Individual VT Hold" of the operat-
[On]
ing manual on the accessory CD-ROM )
OK
The indoor units (corresponding addresses) can be rearranged in arbitrary
order in which you want to correspond to the display number (Unit X) at
Page 4/ 4
this setting. Decide the indoor unit (address) corresponding to the display
[On]
number (Unit X) by consulting the user.
[On]
1.
Touch the [I.U. Display Number Setting] on the "Initial Setting"
screen.
OK
2.
"I.U. Display Number Setting" screen is displayed. When the screen
has multiple pages, they can be switched by touching the [Next
Page] or [Previous Page]. The address (System-Unit) allocated to
the current display number (Unit X) is displayed. The refrigeration
system address (Ref.-in.) is displayed only when this remote con-
troller is connected to a VRF system. Touch the display numbers
(Unit X) whose address you want to interchange.
3.
The address selection screen is displayed. Select the address of
the indoor unit you want to match to the display number selected at
step 2 with [
When [OK] is touched, the display returns to the screen of 2 and
the address is interchanged with the selected display number (Unit
X). Repeat steps 2 and 3 up to the desired order.
When [Back] of the screen of 2 is touched, the display returns to the
"Initial Setting" screen.
2.
I.U. Display Number Setting
Disp No.
System–Unit / Ref.–In.
Unit 1
002–01
/
Unit 2
002–02
/
Unit 3
002–03 /
Back
6.4. Maintenance (Other Settings)
Carry out the following setting and confi rmation, as required.
1.
Touch the [Menu] on the "Monitor mode screen". The "Main Menu"
screen is displayed.
2.
Touch [Next Page] or [Previous Page] to switch between screens. Then
touch the [Maintenance].
(Items that indoor unit does not support are not displayed.)
1.
Fri 10:00AM
Mode
Set Temp.
Status
4.
5.
Room Temp.
Display Item Setting
Visible
[Visible]
Invisible
Cancel
OK
] or [
].
3.
I.U. Display Number Setting
Page 1/ 4
Page 1/ 6
Disp No.
System–Unit / Ref.–In.
01–01
Unit 1
002–01
/
01–01
Unit 2
002–02
/
01–02
01–02
Unit 3
002–03
/
01–03
Unit 4
002–04
/
01–04
01–03
Next
Cancel
OK
Page
2.
Main Menu
Main Menu
Page 1/ 3
Fan
Air Flow Direction
Comfort
Setting
...
Weekly Timer
Timer Setting
Setting
Next
Menu
Monitor
Page
Filter Sign
[Visible]
Room Temp.
[Visible]
Cancel
OK
Page 3/ 3
Maintenance
Previous
Monitor
Page
En-7
Hide quick links:
Advertisement
