Technical Information; Environment Concerns - Zanussi ZDM11301WA User Manual

Stains and dry water drops on glasses
and dishes
• The released quantity of rinse aid is not suf-
ficient. Adjust the rinse aid selector to a
higher position.
• The quality of the detergent can be the
cause.
Dishes are wet
• The programme is without a drying phase or
with a low temperature drying phase.

Technical information

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot
water supply to decrease energy consumption.

Environment concerns

Recycle the materials with the symbol
the packaging in applicable containers to
recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
electronic appliances. Do not dispose
12
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
Cold water or hot water
Place settings
Left-on mode
Off-mode
. Put appliances marked with the symbol
household waste. Return the product to your
local recycling facility or contact your
municipal office.
• Discard correctly the packaging material.
cause.
Refer to 'HINTS AND TIPS' for other pos-
sible causes.
2)
Recycle the materials with the symbol
545 / 447 / 480
220 - 240 V
50 Hz
(0.8 / 0.08 ) / (10 / 1.0 )
max. 60 °C
0.99 W
0.10 W
with the
www.zanussi.com
6
.