Assembly And Installation Guidelines; Overview - YASKAWA VIPA System 300S+ Manual

Assembly and installation guidelines

Overview

3 Assembly and installation guidelines
3.1 Overview
General
Serial Standard bus
Parallel SPEED-Bus
Assembly possibilities
16
This CPU is provided with a parallel SPEED-Bus that enables the additional connection
of up to 10 modules from the SPEED-Bus periphery. While the standard peripheral
modules are plugged-in at the right side of the CPU, the SPEED-Bus peripheral modules
are connected via a SPEED-Bus bus connector at the left side of the CPU.
VIPA delivers profile rails with integrated SPEED-Bus for 2, 6 or 10 SPEED-Bus periph-
eral modules with different lengths.
The single modules are directly installed on a profile rail and connected via the backplane
bus coupler. Before installing the modules you have to clip the backplane bus coupler to
the module from the backside. The backplane bus couplers are included in the delivery of
the peripheral modules.
With SPEED-Bus the bus connection happens via a SPEED-Bus rail integrated in the
profile rail at the left side of the CPU. Due to the parallel SPEED-Bus not all slots must be
occupied in sequence.
You may assemble the System 300 horizontally, vertically or lying. Please regard the
allowed environment temperatures:
1 horizontal assembly: from 0 to 60°C
2 vertical assembly: from 0 to 50°C
3 lying assembly: from 0 to 55°C
VIPA System 300S
HB140 | CPU | 314-6CF23 | en | 19-01
+