Summary of Contents for Metra Electronics 99-7365B
Page 1
Installation instructions for part 99-7365B Table of Contents Kia Sedona 2015-up 99-7365B Dash Disassembly – Kia Sedona 2015-up ..........2 Kit Assembly – ISO DIN radio provision with pocket ...... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted matte black KIT COMPONENTS TOOLS REQUIRED • A) Radio trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • Phillips screwdriver • Panel removal tool CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation.
Page 2
99-7365B Dash Disassembly 1. Unclip the trim flap on the top of the steering column. (Figure A) 2. Unclip and remove the bezel surrounding the radio and instrument cluster. (Figure B) 3. Remove four screws securing the radio, unplug the radio from the factory radio and antenna connectors. (Figure C) Continue to kit assembly (Figure A) (Figure B) (Figure C)
Page 3
99-7365B Kit Assembly ISO DIN radio provision with pocket 4. Snap the radio housing trim panel into the factory trim bezel from the 1. Mount the pocket to the radio back side of the bezel. (Figure C) brackets with the four of the 5. Locate the factory wiring harness #8 x 3/8” Phillips screws supplied. (Figure A) and antenna plug in the dash and make all necessary connections to 2. Remove the metal “DIN” sleeve the new radio. Metra recommends and trim ring from the using the proper mating adapters aftermarket radio. from Metra and/or AXXESS. 3. Mount the bracket/pocket 6. After connecting all wiring, mount assembly to the radio with the the new radio assembly into the screws supplied with the radio. (Figure A) (Figure C)
Page 4
Installation instructions for part 99-7365B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.