Smart Search - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
4. At the bottom of the screen, select the recording type(s) that you want to search (Regular,
Alarm, Motion, Analytics, POS) or select All to search all recording types.
Note
5. Click
6. From the list of search results, double-click the recorded video file that you want to
play back. The video begins playing in the playback window.
7. Use the playback controls at the bottom of the screen to control playback. Playback
modes include slow play, fast play, reverse play, and frame-by-frame playback.
8. To jump forward or backward in the video, click the time bar at the desired time. To
zoom in or out on the time bar, click one of the options in the lower right corner of the
screen: 24 h, 12 h, 1 h, or 30 min.

Smart Search

Note
Note
To quickly locate activity using Smart Search
1. During video playback, click the Smart Search button. A grid is superimposed over the
playback window.
2. Drag the mouse over the area that you want to search for activity.
44
The POS function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/
HEN323*4/HEN321*4/HEN642*4/HEN643*4.
to display the list of search results.
IP cameras support Smart Search through a private protocol.
You must do the following in the IP camera before you can do a
Smart Search with your NVR:
• Enable the VMD (Video Motion Detection) function in your
IP camera.
• Configure the VMD region for your IP camera. See
Configuring Motion Detection Settings
about VMD settings.
on page 77 for more