Figure 10-4 Add Holidays Window
3. In the Holiday Name box, enter the name of the holiday that you want to add.
4. Set Repeat Mode to Once or Always.
Note
5. Set Holiday Range to Date or Week depending on whether you want to designate a single
day or one or more weeks as a holiday.
•
If Date is selected, enter the year, month, and day in the Start Time and End Time
boxes.
•
If Week is selected, enter the year, month, week of the month (1st, 2nd, 3rd, 4th, Last),
and day.
6. If you want to add more holidays, select the Add More check box.
7. Click Add to add the holiday.
8. After you have added the new holidays, on the Holiday tab, set the Status of each holiday.
Select Open to enable the holiday or select Stop to disable it.
Configuring Display Settings
Configuring Display Settings
1. Go to Main Menu SETTING SYSTEM DISPLAY Display.
If you want the NVR to recognize a particular day of the week as
a holiday year-round (for example, every Friday), set Repeat
Mode to Always.
Configuring System Settings
119