Live View Toolbar - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide

Live View Toolbar

If enabled, the live view toolbar appears along the bottom of the live view screen.
Figure 3-3 Live View Toolbar
The toolbar is disabled by default. To enable it, right-click and go to Main Menu SETTING >
SYSTEM  GENERAL  General and select the Navigation check box. Right-click twice to
return to the live view screen. Click anywhere on the screen to display the toolbar.
Table 3-2 Live View Toolbar
Icon
28
Function
Name
Open Main Menu.
Main Menu
Screen Layout Select screen layout format.
Go to the previous screen.
Previous
Screen
Go to the next screen.
Next Screen
Enables a tour (automatically cycles through
Tour Control
channel views). See
page 121.
Open the PTZ control panel. See
PTZ
Controlling PTZ Cameras
Open the Image setting window. See
Image
Camera
on page
Search Open the playback interface. See
Video on page 43.
Open the Voice Broadcast interface. See
Multicast
Configuring Broadcast Settings
Open the Alarm Status information window.
Alarm Status
Open the Channel Info window.
Channel Info
Registration Add and configure a device (camera). See either
Using the Startup Wizard
Camera
Open the Network window. See
Network
TCP/IP and Port Settings
HDD Manager Open the HDD Manager window. See
Configuring HDD Manager Settings
107.
Configuring Tour Settings
on page 30.
53.
on page
on page 53.
on page
on
Adding a
Playing Back
on page 123.
21 or Adding a
Configuring
62.
on page