Configuring The Recording Schedule; Configuring The Video Recording Schedule - Honeywell Performance Series User Manual

Auto Delete Old Files: Select Never or Customized. If Customized is selected, in the Days
Ago box, enter the amount of time to elapse before the files are automatically deleted.

Configuring the Recording Schedule

Configuring the Video Recording Schedule

1. Go to Main Menu  SETTING  STORAGE  SCHEDULE  Rec.
Figure 9-2 Recording Schedule Configuration Tab
2. On the Rec tab, in the Channel box, select the channel (camera) for which you want to
configure a recording schedule.
3. In the PreRecord box, enter a time between 0 and 30 seconds. The default setting is 4
seconds. The pre-record time sets how long the NVR records before the scheduled
recording start time. For example, if the NVR is scheduled to start recording at 12:00 and
the pre-record time is set to 4 seconds, the NVR will start recording at 11:59:56.
4. If the NVR has two HDDs, select the Redundancy check box to enable redundant
recording on the second HDD. This HDD must first be configured as redundant on the
HDD Manager page (see
5. In the ANR box, enter a time between 0s～43200s. It is to save video to the SD card of the
network camera in case the network connection fails. After the network connection
resumed, the system can get the video from the SD card and there is no risk of record loss.
6. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
Regular: The regular recording schedule is indicated by a green bar.
Motion: The motion detection recording schedule is indicated by a yellow bar.
Alarm: The alarm recording schedule is indicated by a red bar.
Configuring HDD Manager Settings
Configuring Storage Settings
on page 107).
105